The WB-18FP Particle-Hog utilizes state-of-the-art fiberglass/polyester design to increase filter service life when operating in a complex atomizing waterborne paint environment. Proper airflow is a critical requirement when using waterborne paint.  Airflow must not only be accelerated but also turbulent to achieve the fastest drying times.  Unfortunately, this combination increases the potential for particles to ruin an otherwise perfect finish.

WB-18FP Particle-Hog is constructed using 18 gram fiberglass media (2.5" in height) spun into progressively denser layers from front to back (air entry to air exit).  This design decreases face loading and increases paint holding capacity, thereby lengthening the time interval between changes.  The fiberglass media also provides a sufficiently open weave to ensure airflow is not inhibited.  The fiberglass media is positioned in front of a tightly woven layer of polyester media. This polyester media is positioned as the final air exiting layer to the paint arrestor to both trap and retain the smallest of paint overspray particles.

Simply put, the WB-18F Particle-Hog is the premier paint arrestor for a waterborne paint environment.  The WB-18F Particle-Hog complies with EPA standards (40 CFR Part 63 HHHHHH).

Click Here for Test Report.